环评与排污许可相互衔接和促进的思考

近年来,世界范围内的工业化和城市化进程明显加快,环境污染是全球性的危机。在我国的环保工作开展中,环境影响评价和排污许可是有效的环保工作手段,这两种手段的有效配合,分别从准入和运营的角度来实现了污染的有效控制,虽然环境影响评价在我国实施的时间非常长,但是,排污许可却是近年来才出现的,出现时间的不一致导致二者在衔接和促进的过程中面临着较大的困境。因此,针对这一情况,本文充分探析了环评和排污许可相互衔接和促进的策略。     

有效调峰对自来水的重要性

深入浅出阐释智慧调峰泵站的基本组成与工作原理,论述有效调峰的基本内涵、实现方法及重要性,给出智慧调峰泵站的设计案例并指出其应用优势,就今后研究设计工作的重点内容给出建议。     

沭阳县新沂河抗洪巡堤查险"六全"工作法

2019年和2020年连续两年,由于受台风影响及上游洪水袭击,新沂河大流量、高水位行洪,本文介绍了沭阳县全力以赴,立足于防,着力于抢,及时启动防汛应急机制,严密巡堤查险,迅速组织抢险,取得了防洪抗洪的全面胜利,有力保障了新沂河两岸200万人民生命财产安全和全县经济社会平稳发展,实现了抗大洪、无大灾、零伤亡的预期目标.     

A strategy for defects healing in 3D printed ceramic compact via cold isostatic pressing: Sintering kinetic window and microstructure evolution

In this study, we developed a unique defect healing method for 3D printed ceramic compact via cold isostatic pressing (CIP) after debinding, and typical features of interlayer interface defects of 3D-printed zirconia compact were characterized and found to be reduced significantly. The characteristic sintering kinetics window and microstructure evolution of the healed sintered bodies were systematically investigated, which was found to be quite different from conventional shaping methods. The three sintering stages are probed by their feature microstructure details such as the mechanically flattening surface at the early sintering stage, the heterogeneous microstructure and high porosity in the interlayer interface region at the middle stage, and the slightly ripple-like structural features combined with the healed interlayer defects at the final stage. The evolution of the pore structure of the healed 3D printed bodies were traced and the mechanical properties such as the Young's modulus, hardness, and fracture toughness were measured to understand the significance of the heal effect.     

张家港市中心城区防洪安全与洪水资源化分析

以张家港市中心城区为例,选取1965—2015年水文数据,采用适线法和同频率法计算200年一遇设计暴雨,运用MIKE11搭建张家港市水文水动力模型,分析计算在超标准洪水条件下张家港市中心骨干河道最高水位,将超标准洪水与常水位下的河道槽蓄量进行比较,计算该条件下张家港市可利用的洪水资源量.结果表明,中心城区在遭遇200年一遇超标准洪水时,河道水位均未超过5.5 m,现有堤防高度基本可以满足该标准的要求,中心城区可利用洪水资源量约为333.63万m3.     

城市排水管网风险评估研究

总结了常见的城市排水管网风险评估的方法及软件,对污水管网的气体爆炸风险、雨水管网的内涝风险、综合风险这三类风险评估的文献进行了归纳整理,并对未来的研究重点及趋势做出了预测。     

Modification of narrow‐spectrum peptidomimetic polyurethanes with fatty acid chains confers broad‐spectrum antibacterial activity

Each year, thousands of patients die from antimicrobial‐resistant bacterial infections that fail to respond to conventional antibiotic treatment. Antimicrobial polymers are a promising new method of combating antibiotic‐resistant bacterial infections. We have previously reported the synthesis of a series of narrow‐spectrum peptidomimetic antimicrobial polyurethanes that are effective against Gram‐negative bacteria, such as Escherichia coli; however, these polymers are not effective against Gram‐positive bacteria, such as Staphylococcus aureus. With the aim of understanding the correlation between chemical structure and antibacterial activity, we have subsequently developed three structural variants of these antimicrobial polyurethanes using post‐polymerization modification with decanoic acid and oleic acid. Our results show that such modifications converted the narrow‐spectrum antibacterial activity of these polymers into broad‐spectrum activity against Gram‐positive species such as S. aureus, however, also increasing their toxicity to mammalian cells. Mechanistic studies of bacterial membrane disruption illustrate the differences in antibacterial action between the various polymers. The results demonstrate the challenge of balancing antimicrobial activity and mammalian cell compatibility in the design of antimicrobial polymer compositions. © 2019 Society of Chemical Industry     

A highly active composite electrocatalyst Ni–Fe–P–Nb2O5/NF for overall water splitting

This work demonstrates a facile Nb₂O₅-decorated electrocatalyst to prepare cost-effective Ni–Fe–P–Nb₂O₅/NF and compared HER & OER performance in alkaline media. The prepared electrocatalyst presented an outstanding electrocatalytic performance towards hydrogen evolution reaction, which required a quite low overpotential of 39.05 mV at the current density of ?10 mA cm^?2 in 1 M KOH electrolyte. Moreover, the Ni–Fe–P–Nb₂O₅/NF catalyst also has excellent oxygen evolution efficiency, which needs only 322 mV to reach the current density of 50 mA cm^?2. Furthermore, its electrocatalytic performance towards overall water splitting worked as both cathode and anode achieved a quite low potential of 1.56 V (10 mA cm^?2).